Advertisement
FEATURES & OPERATIONS
Front Cross Traffic Alert (FCTA)
When approaching an intersection, etc., at a low speed, vehicles approaching from
the left and right of the front of the vehicle can be detected and the driver informed
of these vehicles.
Operation of the Front Cross Traffic Alert is controlled by the following situations.
- When the system detects a vehicle approaching from the left or right of the front of
your vehicle when approaching an intersection, a notification will be displayed.
- When the system determines that your vehicle may be about to enter an
intersection even though a vehicle is approaching from the left or right in front of
your vehicle, a buzzer will sound and a message will be displayed to urge you to
depress the brake pedal.
Head-Up Display (HUD)
TURNING FCTA ON/OFF
(1) Press "
" or "
Information Display (MID).
(2) Press "
" or "
and hold "
(3) Press "
" or "
and then press "
(4) Press "
" to go back to the menu.
CONDITIONS WHEN FCTA WILL BE OPERATED
When all of the following conditions are met, the system will be operated:
• A shift position other than P or R is selected.
• The vehicle speed is approximately 10 mph (15 km/h) or less.
• A vehicle is approaching from the left or right of the front of your vehicle at a
speed between approximately 7 to 37 mph (10 to 60 km/h).
• There are no vehicles in front of your vehicle.
• The accelerator pedal is not being strongly depressed.
• The brake pedal is not being strongly depressed.
Refer to the Toyota "Owner's Manual" for additional information on FCTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
" switches and select "
" switches and select "
." The setting screen is displayed.
" switches and select "FCTA" or "Front Cross Traffic Alert"
" to turn FCTA On/Off.
Multi-Information Display (MID)
"*
or "
1
Vehicle Settings" and then press
60
(if equipped)
"*
from the Multi-
2
*
1
2
7-in display, *
12.3-in display
Advertisement
