Zephyr PULSE HVLS Datasheet page 4

Verify contents
*Please note that different mounting fixtures are used for either: H Beams, concrete beams, rigid frame
beam, refer below:
H Beam
Rigid frame beam
Installation Precautions:
The maximum weight of the fan is about 55kg and the maximum torque is about 50Nm. The
clearance from the fan to the roof (no matter what the roof structure) is the distance between
the location of the lowest part of the fan (nearest to the ground) and the installation of the
upper connecting frame of the fan. For an inclined roof, the required distance should be
moved to the tip of the blade, otherwise, it may cause the blade tip to collide with the roof or
affect the smooth flow of airflow because the distance between the roof and the blade is too
short. Overall, it is necessary to maintain reasonable fan blade and roof space to ensure wide
air flow.
The information contained in this document is the sole property of Zephyr Fans PTY LTD. Any reproduction in part or as a whole without the written permission of Zephyr Fans PTY LTD is prohibited.
Z E P H Y R F A N S . A U
M12 x 50mm *4pcs Hex Head Cap Screw
M12 Nylock Nut *4pcs
M12 Spring Cushion *4pcs
M12 Flat Washer *8pcs
M10 x 80mm *10pcs Expansion Screw (For Concrete Beam)
M8 x 100mm *4pcs Expansion Screw (For Concrete Beam)
M12 Nylock Nut *8pcs
M12 Spring Cushion *4pcs
M12 Flat Washer *8pcs
M12 Threaded Rod 1Meter
PULSE HVLS IN D UST RIA L FAN
4