Zephyr PULSE HVLS Datasheet page 13

Installation Guide
Control panel and functions
SCREEN
SETTING
+
ENTER
Installation Guide
Starting up the Pulse fan
1. Switch on the air switch in the box to connect with the power supply.
2. Press the ON/OFF key and star the machine.
3. Remain the fan speed in low speed for 30 seconds and then Press the + or - key to the
required speed.
CAUTION
• Read the Instruction Manual carefully before installation and operation and make sure that
the fan is not obstructed in all directions.
• Before performing maintenance on the large fan, please ensure that the power supply is
disconnected.
The information contained in this document is the sole property of Zephyr Fans PTY LTD. Any reproduction in part or as a whole without the written permission of Zephyr Fans PTY LTD is prohibited.
Z E P H Y R F A N S . A U
ON/OFF - Start or Stop the machine
ENTER - Confirm and save the parameters setting
SETTING - Parameters setting
TIMER - Clock and Timing settings
+For increase speed and parameters setting
- for reduce speed and parameters setting
PULSE HVLS IN D UST RIA L FAN
Indicator light
TIMER
ON/OFF
13