Before First Use - Yoer FH02W BLOWER Manual

BEFORE FIRST USE

1. Take the product out of the packaging and take off the poly-bag.
2. Set the machine up on a flat, stable, heat-resistant surface.
OPERATING INSTRUCTIONS
Connect the power plug with power outlet, when you hear a signal alarm it means that heater
has connected to the power. Power indicator lamps will light up and the product enters into
stand-by mode.
Press the buton
a) Temperature setting:
Press button two times, the temperature indicator will light up on the display.
You can change the temperature by pressing
temperature is from 16-32
CAUTION: The device will not measure the temperature within 10s when power on the device.
After the device works for 10s, if the ambient temperature is higher than the temperature that
has been set, the heater will go into standby mode. If the ambient temperature decreased
under that has been set, the heating function will be on again.
b) Power setting:
Press button to choose the desired heating power:

Low heating power

High heating power
 ECO
ECO mode - auto heating power

Ventilation - in this operating mode only the fan operates with no heating

Anti-freeze function - the appliance keeps the room at a temperature above 7°C
NOTE: In ECO function the appliance will automatically set the power level to guarantee the
best comfort reducing the energy consumption. In this operating mode the unit may switch the
heating power level from maximum to minimum and vice versa, several times in an hour. When
using the ECO function, the range of temperature is 16-26°C.
to turn on the unit.
0 C. The temperature that you have set will be effect at once.
ENGLISH
or
34
button. The range of the