Table of Contents
Advertisement
HMI SCREENS
• M in/M ax flow rate setting
Press the Min Flow Rate or Max Flow Rate icon to display the following screen.
After selecting the minimum or maximum of flow rate, click the Apply button.
Press Cancel to keep the previous settings
Initial Min/Max Flow rate is '0'
The Min flow rate must be lower than The Max flow rate, So be careful when you changing the
setting. (0 ~ 0.57 m
*Refer to "How to connect the flow rate sensor"
98
3
/min (0~150 GPM) or 0 ~ 0.6 m
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
3
/min (0~600 LPM))
Advertisement
Table of Contents
