Table of Contents
Advertisement
HMI SCREENS
Select Setting 2 on the Setup_Installer Mode screen, and the following screen will appear.
Icon
Description
This function is used for on-site inspection only for models with a
legal freezing capacity of 20RT or higher.
This function is used for on-site inspection only for models with a
legal freezing capacity of 20RT or higher.
Set the condensation temperature at which the spray function
works.
Set the condensation temperature at which the spray function
works.
Select whether to use a flow sensor or not.
Set the display unit when using the flow sensor. (GPM or LPM)
Set the minimum flow rate when using the flow sensor.
Set the maximum flow rate when using the flow sensor.
Due to our policy of continuous product innovation, some specifications may change without notification.
96
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Advertisement
Table of Contents
