Table of Contents
Advertisement
Process alarm (Error)
- Common alarm (Error)
CH10XXX error basically stops the product
- Alarm (Error) by cycle
When the alarm occurs by cycle, applicable cycle is maintained at stopped condition and normal
cycles operate normally.
If the alarm from the cycle is canceled, it resumes normal operation.
CAUTION
!
When composed of 3 cycles, overall product condition maintains the operating condition
even when 2 cycles are in error condition, and the overall product will stop only when all 3
cycles are in error condition.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
TEST RUN
133
Advertisement
Table of Contents
