Table of Contents
Advertisement
• Cooling type setting
In setup_installer mode, press the cooling type setting for more than 5 seconds and enter the
password, a pop-up window to set the cooling type appears.
After selecting the desired cooling type, click the Apply button.
Press Cancel to keep the previous settings
When changing the cooling type to the low temperature type, the concentration of antifreeze
must be managed by referring to the minimum antifreeze concentration for a freezing
temperature of -15 °C (5 °F).
• Passw ord setting
In the device mode, if you press System Password area, Password window is displayed.
1. Do not use password
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
HMI SCREENS
93
Advertisement
Table of Contents
