Midea V8 VRF Series Service Manual page 25

V8 VRF Indoor Units
Table 2.2: Indoor unit Parameter Settings(continues)
Paramet
er Parameter Name
Code
Valve enabled/ disabled
at the time of heating
N64
Selection of auxiliary
heater
Set anti hot air
temperature for IDU
N65 cooling [anti hot air
temperature of fan coil
unit of the old platform]
N66 Auto Dry
Target relative humidity
N67
of Auto Dry
Notes:
If use other controllers, parameter settings need refer to the corresponding manual.
24
Parameter Default
Range Value
00/01 00
00/01/02/03/04 00
00/01 00
00/01/02/03/04
02
/05/06
Remarks
00: Valve enabled at the time of heating
01: Valve disabled at the time of heating
Note: Applicable to fan coil unit only
Fan coil unit: 00: 0°C
01: -2°C
02: -4°C
03: -6°C
04: Anti hot air invalid (water inlet temperature - indoor
ambient temperature)
00: Invalid(default)
01: Valid
Note: Applicable to cooling operation in cooling mode or
auto mode
00: 40%,
01: 45%,
02: 50% (default),
03: 55%,
04: 60%,
05: 65%,
06: 70%