Mitsubishi Electric 800 Series Instruction Manual page 42

 Operation example of compensation value setting
• Calibration using the operation panel (FR-DU08)
Select C29 in parameter setting mode.
Present compensation command value
is displayed.
"102.7" and "C29" are alternately
displayed, then "102.7" is set as
compensation value.
42
MOTOR THERMISTOR INTERFACE
Adjusting a compensation value as desired
Turn .
The present setting at the instant of
turning
Turn
"99.8" flickers and "99.8" is set
as compensation value.
is displayed.
.