Table of Contents
Advertisement
» Remote-Control Operation (Audio)
£. (continued)
SELECTOA/ FUNCTION
1 @@
@ ®@ oy
Ly)
T Begin the sound
source to be
recorded.
Recording on tape deck
For Technics tape decks with the proper remote-control terminal
only. Consult your dealer for details.
4 Press the record key.
(The tape deck will be in the recording stand-by mode.)
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.)
5 Press the appropriate playback key to begin
the recording.
1
Select the sound source to be recorded.
b>: For the "A"-side of the tape
<4: For the "B"-side of the tape
2 Select "TAPE".
6 Select the desired sound source.
3 Select tape deck (1 or 2).
7 Begin the sound source to be recorded.
To make an unrecorded passage during recording
Select "TAPE" by the function select keys (step 2. "70
pec muTE
above) and then press the auto rec mute key.
(After 4 seconds, the tape deck will automatically change to the
recording stand-by mode.)
To start the recording again, press the playback key.
To stop recording temporarily
Select "TAPE" by the function select keys (step 2
Pause
above) and then press the pause key.
Press the playback key to resume recording.
To stop recording
Select "TAPE" by the function select keys (step 2
2
above) and then press the stop key.
—50—
Advertisement
Table of Contents
