Making A Recording; Recording On A Tape Deck; Recording On A Vcr - Technics SA-DX940 Operating Instructions Manual

m
TAPE MONITOR
Making a recording
• You cannot record a source connected through a digital
terminal.
• When recording CD, DVD, or TV, ensure the source is connected
through the corresponding anatog terminals (,_ pages 10-11)
and "ANALOG" input is selected (,_ page 22).
Before recording, prepare the tape deck.
See the tape deck's operating instructions for details.
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
Any source can be selected except TAPE.
2
Begin recording on the tape deck.
Follow your tape deck's operating instructions.
Begin the source to be recorded.
Follow your equipment's operating instru(_tions.
] To monitor the recorded sound
TAPE MONITOR
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
INPUT SELECTO_(_
Press [TAPE MONITOR] once again to turn it off.
Before recording, prepare the VCR.
See the VCR's operating instructions for details.
Turn [INPUT SELECTOR] to select the
source to be recorded.
Any source can be selected except VCR and TAPE.
O
Recording from the tape deck is not possible.
Begin recording on the VCR.
Follow your VCR'S operating tastt'uc_one.
Begin the source to be recorded.
Follow your equipment's operating instructions.
RQT5308