Table of Contents
Advertisement
t r Recording
Have you completed the steps (on page 18) of
"Basic Operating Procedure" ?
2
1
ees)
ES
Begin the
Begin
audio/video
recording.
source to be
recorded.
Tape recording
To record on the tape deck and/or digital audio tape deck (DAT)
connected to the "TAPE" and "DAT" terminals
Before recording, prepare the tape deck and/or DAT for recording
(recording level adjustment, etc.).
1 Select the audio/video source for recording.
2 Begin recording.
Follow your tape deck's and/or DAT's operating instructions.
3 Begin the audio/video source to be recorded.
Note:
When proceeding the digital recording from "CD" to "DAT", follow
the operating steps as shown above after the connecting the CD
and/or DAT to the main unit with optical-fiber cables (refer to page
5).
Press the tape-monitor switch
ae
(TAPE-MONITOR) while
MOTOR
recording.
(The tape indicator will illuminate.)
Follow your tape deck's operating instructions for
availability and operation of the tape monitor function.
VCR (VCR 1 and/or VCR 2) recording
Before recording, prepare the VCR 1 (or VCR 2) for recording.
Be sure to set the input selector on the VCR to the external input
position.
1 Select the video source for recording.
Then, select the audio source if it is different from the video
source as in simulcast broadcasting.
2 Begin recording.
Follow your VCR's operating instructions.
—39—
Tape indicator
GURRT2 STEREO
1
iis
HE
| ie
3 Begin the audio/video source to be recorded.
When recording the video disc on a video tape by using the S-video
terminal, set the input mode switch of the VCR to S-video. (Refer to
the operating instructions of the VCR for details.)
Advertisement
Table of Contents
