Table of Contents
Advertisement
TUNING
MODE
.
M a n u a I t u n e r ope rat 10 n
{to listen to broadcasts by using the tuning contr!) ————
Have you completed the steps (on page 18) of
"Basic Operating Procedure" ?
1 Press the "TUNER" button.
2
Press the "FM" or "AM" button.
Before tuning AM broadcast stations, press to select the
appropriate frequency step for your locality.
(Refer to item [87] on page 13.)
3 Select the desired tuning mode, "AUTO" or
"MANUAL".
4 Turn the tuning contro! so as to tune to the
desired broadcast.
In "AUTO" mode, the next station, higher or lower in broad-
cast frequency, will be automatically tuned in.
In "MANUAL"
made, the frequency will change, using the
smallest step available, only as the tuning control is being
turned. This will allow you to tune in all of the broadcast
frequencies available in that band.
If you want to lock the broadcast channel presently being heard,
press the tuning-mode selector to select the "LOCK" position.
If noise is excessive in the FM mode
—£
——#_______LL—
Press the FM mode selector.
[PA MORe |
®
The sound will then be heard in monaural and the FM stereo
indicator will not illuminate. If the broadcast signal is weak, or If
there is a large amount of interference, sounds can be heard more
clearly.
Advertisement
Table of Contents
