Table of Contents
Advertisement
Start the
source.
Technics
= csr av conrmo. eTeneo meceiven 8A-ax010
DELAY TIME
1 Start the desired sound source.
2 Turn on the surround-sound system.
Select the "DOLBY" mode.
Each time the button is pressed, the (B>) mark will change as
follows: DOLBY — HALL + CLUB — STADIUM...
The Dolby Pro-Logic Surround
indicator illuminates simul-
taneously when this mode is selected.
Dolby Pro-Logic Surround indicator
(>) mark
'i
aa] <> carton — | summceno
2
mu
PEG MOE i couBy
To adjust the delay time
Adjust the delay time while listening with the Dolby Pro-Logic
Surround function on.
Each time the button is pressed, the delay time will change as
follows: pis ms—20 ms—25 ms—*30 ms>
Cc]
DELAY TIME
Adjustment is made depending on where the rear speakers are set.
if the speakers are placed far from the point of listening, adjust the
delay time to short, and if placed near, adjust to tong.
=.
—33—
va Bk tk eae
4 Select one of the center modes.
Each time the button is pressed, the center mode indicators
will
change
as
follows:
NORMAL-*PHANTOM—CENTER
OFF...
NORMAL.............8elect this mode when using the center
speaker and the rear speakers.
Select this mode when not using the center
speaker (In this case, the center speaker
channel is played through the left and right
speakers).
elect this mode when adjusting the INPUT
BALANCE. (See page 34.)
PHANTOM
CENTER OFF ..
Delay time
Advertisement
Table of Contents
