Tape Recording - Technics SA-GX505 Operating Instructions Manual

Av control stereo receiver

Hide thumbs Also See for SA-GX505:

Table of Contents

Available languages

[TAPE/DAT MONITOR]

Tape recording

To record on the tape deck or digital audio tape deck (DAT) con-

nected to the "TAPE/DAT" terminals.

To check the sound recorded

Before recording, prepare the tape deck or DAT for recording

(recording level adjustment, etc.).

With a tape deck with 3 heads, it is possible to check the sound

recorded on the tape.

1 Switch ON the power.

Press

the tape-monitor

switch

and

set the

monitor switch on the tape deck to "TAPE"

while recording.

Select the "A" and/or "B" speaker system(s)

(The tape indicator will illuminate.)

to be used.

Check to be sure the tape indicator is not

illuminated.

If the tape indicator is illuminated, press this switch.

A Select the audio/video source for recording.

Begin recording.

Follow your tape deck's or DAT's operating instructions.

Begin the audio/video source to be record-

ed.

Adjust the volume level and the tone quality

as desired.

(Refer to page 14.)

Table of Contents