Table of Contents
Advertisement
>
For detailed information concerning operation steps, etc., please see
«
the appropriate page of the operating instructions for each unit.
rege
Set the
power of
each
component
to ON.
Receiver
fT
oO
Compact disc player
To switch each component's power ON/OFF
Have you connected the power cords as indicated
on page 6 ?
1 Set the power of each component to ON.
2 Press the audio power key.
(The power of each component will be switched OFF.)
The "STANDBY" indicator ("STANDBY") on the receiver will
ituminate,
and the indicators of all other components
will
switch OFF.
To restore power to all components, follow step 2 again.
To attenuate the volume level
Press the muting key.
Mors
To resume to the previous volume level from the main unit, press
and hold the "PHONO" Input selector for about 5 seconds.
(The unit will switch to the phono mode.)
The volume level is attenuated by approx., 20 dB (1/10).
(The muting indicator on the receiver will illuminate.)
Press once again to resume to the previous volume level.
(The muting indicator on the receiver will not illuminate.)
'
To adjust the volume level
Use the volume keys.
Cia)
—4—
Advertisement
Table of Contents
