Technics SA-GX910 Operating Instructions Manual page 59

cx
Repeat step 3
until the desired
Program is
completed.
Program play
1 Press the "VDP" input/function select key.
2 Facing toward the video disc player:
Set the programicontinue key in the program
mode.
(The program indicator of the video disc player will illuminate.)
To clear a program entry
Facing toward the video disc player:
Press the clear key.
Each time the clear key is pressed, the last selection in the pro-
gram sequence will be canceiled.
To clear the entire program
Facing toward the video disc player:
Press the stop key one time while programming
or two times while in the program play mode.
GSSS®
25 S06
3 Facing toward the video disc player:
Select the desired chapter number.
To select a two-digit chapter number:
Press the [+10] key to select the "tens" digit, and then one of
the [0]—-[@] keys to select the "units" digit.
To select a chapter number such as 30:
Press the [+10] key three times to select 3, and then [6]
4 Repeat step 3 until the desired program is
completed.
5 Facing toward the video disc player:
Press the play key.
(Play will start.)
CLEAR!
STOP
%
—59—