Download Print this page
Xylem Bell & Gossett e-80 Series Quick Manual
Xylem Bell & Gossett e-80 Series Quick Manual

Xylem Bell & Gossett e-80 Series Quick Manual

Hide thumbs Also See for Bell & Gossett e-80 Series:

Advertisement

Quick Links

1 Introduction
NOTICE:
Read the installation, operation and maintenance instructions located
on the Xylem website before use. Improper use of the product can
cause personal injury and damage to property and may void the war‐
ranty. See e-80, hydrovar X Smart Pump, and hydrovar X Instruction
Manuals for complete product warranty and installation instructions.
WARNING:
Personal protective equipment should be worn when
handling this equipment. Only use properly sized certi‐
fied lifting equipment & lifting devices, including slings,
suitably rated for the weights to be lifted. Slings, when
used, must be of identical materials to avoid differences
in stretch rates. Do not use lifting devices that are frayed,
kinked, unmarked, or worn.
2 Lifting and handling requirements
WARNING:
• Assembled units and their components are heavy.
Failure to properly lift and support this equipment
can result in serious physical injury and/or equipment
damage. Lift equipment only at the specifically identi‐
fied lifting points. Lifting devices such as eyebolts,
slings, and spreaders must be rated, selected, and
used for the entire load being lifted.
• Crush hazard. The unit and the components can be
heavy. Use proper lifting methods and wear steel-to‐
ed shoes at all times.
Series e-80X Smart Pumps
For safety and correct product usage, read the manual before this
product is used.
WARNING:
Always lock out power to the driver before you perform
any installation of maintenance tasks. Failure to discon‐
nect and lock out driver power will result in serious injury.
WARNING:
This product can expose you to chemicals including
Lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to: www.P65Warnings.ca.gov.
QUICK GUIDE
P2006090_Rev B
THE MANUAL IS AVAILABLE AT:
https://qr.xylemsales.com/hijesr

Advertisement

loading

Summary of Contents for Xylem Bell & Gossett e-80 Series

  • Page 1 Read the installation, operation and maintenance instructions located any installation of maintenance tasks. Failure to discon‐ on the Xylem website before use. Improper use of the product can nect and lock out driver power will result in serious injury. cause personal injury and damage to property and may void the war‐...
  • Page 2: Unit Installation

    For safety and correct product usage, read the manual before this product is used. Lifting option 1: Sling around the motor bracket. Lifting option 2: Sling around pump flanges and use motor eyelets as guides to maintain balance while lifting. 3 Unit installation Ensure at least 8 inches (203 mm) of space is available above the motor, excluding WARNING:...
  • Page 3: Preparation For Startup

    For safety and correct product usage, read the manual before this product is used. 4 Preparation for startup You must follow these precautions before you start the pump: WARNING: • Flush and clear the system thoroughly to remove dirt or debris •...
  • Page 4 For safety and correct product usage, read the manual before this product is used. Figure 2: Auxiliary connections Table 1: Position number Name Description Default setting Analog input 1 Power supply +24 VDC, max. 60 mA (to‐ Pressure sensor 1 tal, terminals 1 + 5) Configurable analog input 1 Electronic GND...
  • Page 5: Drive Operation

    For safety and correct product usage, read the manual before this product is used. Position number Name Description Default setting Digital Input 4 Configurable digital input 4, internal pull- Not selected up +24 VDC, contact current 6 mA Electronic GND Digital Input 5 Configurable digital input 4, internal pull- Not selected...
  • Page 6 • Generate a work report • Contact the assistance service. Download the App and connect the mobile device with the unit 1. Download the Xylem X App to the mobile device from App Store or Google Play by scanning the QR code: 2.
  • Page 7 For details and updates on Xylem product cybersecurity visit xylem.com/security Xylem values system security and resilience. Defending against cybersecurity threats is a shared responsibility. Xylem builds products that are secure by de‐...
  • Page 8 For safety and correct product usage, read the manual before this product is used. Xylem Inc. Xylem and Bell & Gossett are registered trademarks of Xylem Inc. or one of its subsidiaries. 8200 N. Austin Avenue, Morton Grove, IL 60053 All other trademarks or registered trademarks are property of their respective owners.