HAMPTON BAY DSHD5979B Use And Care Manual page 6

Installation (continued)
4
Making the electrical connections
□
Ground Wire:
1. Wrap the supply ground wire around the green ground
screw on the crossbar (AA), no less than 2 in. from the end of
the wire. Tighten the ground screw.
2. Connect the fixture ground wire to the supply ground wire
with a wire connector (CC).
□ Supply Wire:
1. Connect the supply white wire to the white fixture supply
wire with a wire connector (CC).
2. Connect the supply black (or red) wire to the black fixture
supply wire with a wire connector (CC).
3. Wrap each connection with approved electrical tape and
carefully insert all of the connected wires into the outlet box.
5
Installing the fixture body to the outlet
box
□
Reattach the backplate on the fixture body (A) and two
rubber washer (5) to the crossbar assembly (AA).
□
Secure with the previously removed mounting balls (1).
AA
6
□
□
5
1
6
CC
AA
Green ground screw
Installing the light bulb
Install the correct bulb (not included) referring to fixture
markings and/or labels for maximum wattage.
Reattach the cage (2) to the fixture hood on the fixture body (A)
Secure with the previously removed mounting screws (3).
NOTE: Use one 60W maximum medium base (E26) type "A"
or type "S" or 9W maximum medium base (E26)
self-ballasted LED vintage Edison bulb (sold separately).
A
2
3