Download Print this page

JVC XV-S200BK Instructions Manual page 43

Hide thumbs Also See for XV-S200BK:

Advertisement

DOWN
MIX
To playback a DVD VIDEO
disc recorded with surround
O_T_L _UO_ OUTPUT
multichannel
audio
_=_"°_=
correctly,
the DOWN MIX
setting
must be properly
made according
to your
["=_"_'
]
audio system.
Note that this setting
affects the output
signal from the
AUDIO (both DIGITAL and ANALOG)
output jacks when
playing
back a DVD VIDEO disc recorded
with surround
multichannel
audio.
Lt/Rt
When you enjoy multichannel
surround
audio by
connecLing the unit's AUDIO output (normally,
the
DIGITAL output) to a surround
decoder.
LoIRe
When you enjoy conventional 2-channel stereo audio
by connecting
the unit's AUDIO output to a stereo
amplifier/receiver
or television
set, or when you
duplicate
audio of a DVD VIDEO disc recorded with
surround
audio to your MD, cassette, etc.
NOTES
• The Down mix function does not work when the 3D
PHONIC function is activated.
• The DOWN MIX setting does not affect an MPEG or
Dolby Digital bitstream
signal from DIGITAL OUT.
To enjoy the DOWN MIX effect from DIGITAL OUT when
playing
back a disc recorded
with the MPEG
multichannel
or Dolby Digital format,
set "DIGITAL
AUDIO OUTPUT" to "PCM ONLY" (see page 40).
• When playing back a disc recorded with DTS, you
cannot get the DOWN MIX effect from both DIGITAL
and ANALOG outputs.
COMPRESSION
You can compress the dynamic
range of the sound if needed.
Using this function, you can
listen to sound at low volumes
easily.
_T_o_
_
I
]l
• ON
Audio is played back with the dynamic
range
compressed.
• OFF
Audio is played back as it was recorded.
NOTES
• The Compression function works only when playing
back a disc recorded with DOLBY DIGITAL 1CH or 2CH.
The setting is not effective for other discs.
• The Compression function does not work when the 3D
PHONIC function is activated.
• With the digital connection, the COMPRESSION
settings in the AUDIO page of the preference display
are invalid. Settings for these items must be made from
the decoder.
MONITOR
TYPE
Initial settings
You can select the monitor
type to match your TV
when you playback
DVD
VIDEO discs recorded
for
wide screen televisions.
4:3 LB f_l
(Letter Box Conversion)
When you connect a normal
TV to the unit.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed
with
bands across the upper and
lower portions of the screen.
4:3 PS []
(Pan Scan Conversion)
When you connect a normal
TV to the unit.
When you play a wide picture
recorded
on a DVD VIDEO
disc, a portion
of the picture is
automatically
cut off from the
left and right sides of the
image.
Depending
on the disc, it may not be possible to
playback in this mode. In that case, the picture is
played back as in 4:3 LB r_l mode.
16:9 WIDE (Wide Television screen)
When you connect a
wide-screen
TV to the
unit.
SCREEN SAVER
A television
monitor
screen may be burned out if a static
picture is displayed
for a long time.
To prevent this, the
unit automatically
activates the screen saver function
if a
static picture, such as an on-screen
display or menu, is
displayed
for over 5 minutes.
MODE 1
The current picture gets
dark.
MODE 2
The "screen saver" picture
appears and its brightness
changes.
• OFF
The screen saver function
is off.
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• The screen saver function is not activated when the
selected disc is an Audio CD.
41

Advertisement

loading