JVC XV-S200BK Instructions Manual page 15

Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy using the unit by simply connecting itto a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
The unit
F_qDEO COMPONENT
AND
TV
Yellow
_Red white _ 1
I
mye,ow -
Audio/Video cable _
(
Red
(supplied)
[
S-video cable
(not supplied)
IN
S-VIDEO
VIDEO
LEFT
AUDIO
RIBHT
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-video output or the component video output at a time.
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the rear
panel to "S-VIDEO AND VIDEO". Then, "S-VIDEO" appears on the display window for a few seconds.
(Display Window)
VCDVD GROUPTITLETRACK CHAP O1 A-B
ooooo ooooo o111o ooooo IOOOl o111o IIIIO IIIIO o111o ooooo ooooo ooooo
HJ_H H33 _JJ HJJ 133 H33 i_H313J i3_i H33 H33 H33
ooooo ooooo ommmo ooooo oomoo ommmo ||mmo m|||o omm|o ooooo ooooo ooooo
Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed
setting is not effective.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to an NTSC television. Do not connect the unit to a PALtelevision.
13