JVC XV-S200BK Instructions Manual page 38

MP3 CD playback
Buttons
II
Functions
Starts playback
Stops playback completely
Pauses playback temporarily
Skips back or forward a Track *.
Skips back or forward a Group.
You can skip a Track across a Group. i.e. pressing
when the last Track of the current Group is selected
skips to the first Track of the next Group.
NOTES
• The current Group and Track numbers are shown on the
display window in the following manner.
N!i!N i!i!i i!i!i i!i!i i!i!i N!B!N i!i!i N!B!N i!i!N
I
I
Current t rackelapsed time
Current t racknumber
Current g roup number
• You cannot advance or reverse playback of an MP3 CD
disc rapidly.
1
Holding down the +10 button for 2 secondsor
more.
"- - -" appears in the display window showing that
you can now enter a three-figure number directly.
2
Usethe numeric buttons (0 through 9) to
specifythe desiredTracknumber directly.
• Example:
To specify Track 254 : press 2, 5 and 4.
• You can also specify a single- or double-figureTrack using
this method.
Example:
• To specify Track 5, press 0, 0 and 5.
• To specify Track 25, press 0, 2 and 5.
Advanced functions
You can playback Groups on an MP3 CD disc in the
desired order.
//
While stopped, you can select a Group to be played
using the numeric buttons.
During playback, you can select a Track in the current
Group to be played using the numeric buttons.
How to select a Track or Group:
The same method for selecting a track of an Audio CD
disc can be applied for selecting a Group or Track of an
MP3 CD disc except for a three-figure Track.
For selecting a three-figure Track (i.e. Track 100 or
higher), follow the procedure below.
_o --2
_ -- 1
-ivc
OO0
_'_ '_:_
F_ , "_._L.
J_
3
4
2-2
2-1
• While stopped
1
Press PLAYMODE.
The play mode menu appears on the TV screen.
2 Use CURSOR </_ to move I_ to
[PROGRAM]and press ENTER.
The program table appears under the menu bar (as
shown above).
The "PROGRAM" indicator appears in the display
window on the front panel.
36