Page 1
USER MANUAL BR1200 Version: 1.0 Date: February 2019...
Page 2
Important Statement Thank you for choosing our product. Before using this product, please read this user manual carefully to avoid risks of danger to the users of this product or those nearby and damaging the device. Follow these instructions to ensure that your product functions properly and completes verifications in a timely manner.
Page 3
About This Manual This manual mainly introduces operating the user interfaces and menu functions of 2.4 Inch color screen devices. The product images in this manual may not be exactly inconsistent with your product; the actual product's display shall prevail. The functions with symbol are optional.
Table of Contents 1. Notes before use .................................. 1 1.1 Enrollment and Verification of palm ......................1 1.2 Method of Fingerprint registration ......................2 1.3 Use of Touch Screen ............................... 3 1.4 Initial Interface ................................3 1.5 Status Icons ................................3 1.6 Touch Operations ..............................
Page 5
4.3 Deleting a User ..............................22 4.4 User Display Style ..............................23 5. User Role ....................................24 6. Comm. Settings ................................. 25 6.1 Ethernet Settings ..............................25 6.2 Serial Comm. Settings ............................25 6.3 PC Connection ............................... 26 6.4 Cloud Server Setting ............................27 7.
The user needs to move forward and backward to adjust the palm position during the palm registration. Verification Place your palm in the green area parallel to the device with space between the fingers. BR1200 User Manual P a g e...
Wrong ways to press the fingertip onto the sensor: Pressing on the side Pressing vertically onto the sensor of the sensor Pressing too low Tilting while pressing onto the sensor onto the sensor BR1200 User Manual P a g e...
Indicates that the Ethernet is disconnected. The connection between device and ADMS server is successful. ADMS The connection between device and ADMS server is failed. server The communication data of ADMS are being transmitted. BR1200 User Manual P a g e...
Return/Save to make the settings take effect. If timeout and no operations on the interface, the system returns to the main interface without saving registration, user information modification or parameter settings. Soft Keypad Content display area Clearing previous entry Confirming the entry Return key BR1200 User Manual P a g e...
Under this fingerprint verification method, a fingerprint collected by the sensor is verified with all fingerprints stored in the device. Please use the correct way to press the fingertip onto the fingerprint sensor (for detailed instruction, please refer to 1.2 Method of Fingerprint registration BR1200 User Manual P a g e...
Page 11
Enter your ID and tap [OK]. Press your fingerprint for verification. Verification Succeeds. Verification Fails. If you have registered multiple verification modes, the following interface appears after you enter your ID and tap [OK]. BR1200 User Manual P a g e...
Under this palm verification method, a palm collected by the sensor is verified with all palms stored in the device. Place your palm in the palm multi-mode collection area, such that the palm is placed parallel to the device. The device will automatically detect as palm verification mode. BR1200 User Manual P a g e...
Page 13
Tap the Palm icon to access the Place your palm in the palm multi-mode palm verification interface. collection area, such that the palm is placed parallel to the device. The result is displayed as above. BR1200 User Manual P a g e...
Note: If you have registered only the password, you will access the password verification interface directly after entering your ID. If you have registered in multiple verification modes, the icons of BR1200 User Manual P a g e...
Scan the QR code at the camera area for verification (the QR code must be registered first). Verification Succeeds Verification Fails Remarks: When the verification mode is card, it includes card verification and QR code verification by default. | 10 BR1200 User Manual P a g e...
Press your finger onto the The password entry interface pops fingerprint scanner to scan your up after verification passes. Enter fingerprint for verification. The the password and tap [OK]. result is displayed as above. | 11 BR1200 User Manual P a g e...
Page 17
When the device is in standby mode, press on the screen to open the Main Menu, press Access Control > Access Control Options > Verification Mode to enter the Verification Mode setting interface. | 12 BR1200 User Manual P a g e...
Auto Test: It will automatically test different module’s functions, including the LCD, fingerprint sensor and clock RTC test. System Information: It is for checking device capacity, device and firmware information. | 13 BR1200 User Manual P a g e...
1. The user ID may contain 1-9 digits by default. If you want to expand the number of digits, please consult our pre-sales technical support personnel. 2. During the initial registration, you can modify your ID, which cannot be modified after registration. | 14 BR1200 User Manual P a g e...
The authentication is based on the authentication method(s) that the super administrator has registered. The following is an example of accessing the main menu as the super administrator by fingerprint authentication. | 15 BR1200 User Manual P a g e...
The system will automatically return to the New User interface and move back and forth to position your palm within the after successful registration. green frame. 3.5 Card Number Registration Press Badge Number. | 16 BR1200 User Manual P a g e...
Note: QR Code can also be used for registration here. You can use the QR code generator to convert the card number into a QR code for registration. 3.6 Password Registration Press Password. Enter the password and press Enter the password again and [OK]. press [OK]. | 17 BR1200 User Manual P a g e...
3.8 Setting the Access Control Rights Access control option is used to set door access for all the personnel. It includes access group setting, Time period, and Duress fingerprint management. Press Access Control Role. | 18 BR1200 User Manual P a g e...
Time rules can be set in Note: the management of access control. Up to 50 time rules can be set. For specific setting methods, please refer to "10.2 Time Rule Settings".) Press Time Period. | 19 BR1200 User Manual P a g e...
Duress Fingerprint: User can choose one or more registered fingerprint(s) as Duress Fingerprint. When verifying through duress fingerprint, duress alarm will be triggered. Press Duress Fingerprint. Example: Among those registered fingerprints (6, 7, 8), choose the 8 fingerprint as the duress fingerprint. | 20 BR1200 User Manual P a g e...
> User Management > All Users > Or when the device is on the initial interface press Select a user > Click Edit to enter the user editing interface. | 21 BR1200 User Manual P a g e...
If you select Delete User, all information of this user is deleted. 2. After the privileges of the super administrator is deleted, the super administrator becomes a common user, without super administrator privileges any more. | 22 BR1200 User Manual P a g e...
> User Management > Display When the device is on the initial interface, press Style to enter the Display Style setting interface. Display Styles are shown as below: Single Line Style Multiple Line Mixed Line | 23 BR1200 User Manual P a g e...
You only need to select the features in sub-menus. If no super administrator is registered in the device, the following prompt appears after you tap Enable Defined Role. | 24 BR1200 User Manual P a g e...
6.2 Serial Comm. Settings When the device is on the initial interface, press button > COMM. Settings > Serial Comm to enter Serial Comm interface. Turning On / OFF RS232/RS485 Function | 25 BR1200 User Manual P a g e...
If a Comm Key is set in the device, the connection password needs to be entered when the device is connected to the PC software, so that the device and software can communicate. | 26 BR1200 User Manual P a g e...
Device ID: Input number for the device, ranging from 1 to 254. 6.4 Cloud Server Setting This option is used to connect with ADMS server, such as IP address and port settings, and whether to enable proxy server etc. | 27 BR1200 User Manual P a g e...
Page 33
Enable Proxy Server: Method of enabling proxy. To enable a proxy, please set the IP address and port number of the proxy server. Entering method of proxy IP and server address is same like above. | 28 BR1200 User Manual P a g e...
Access Logs Warning: When the remaining recording capacity becomes lesser than the set value, the device will automatically prompt warning message. It can be disabled or set to a value ranged from 1 to 9999. | 29 BR1200 User Manual P a g e...
ID, retrying is allowed; the number of retries can be within 1 ~ 9. Fingerprint Image: To set whether to display the fingerprint image on the screen during registration or verification. Four choices are available. | 30 BR1200 User Manual P a g e...
Remark: When resetting to factory settings, the date and time will not be affected. For example, if the device date and time are set as “18:30 on January 1, 2020”, the date and time will remain unchanged after resetting to factory settings. | 31 BR1200 User Manual P a g e...
Press any key or finger to cancel standby mode. You can disable this function, or set the value to 1~999 minutes. If this function is turned to | 32 BR1200 User Manual P a g e...
Page 38
[Disabled], the device will not enter standby mode. Remark: Disabling this function is not recommended due to excessive power consumption. Main Screen Style: It will set the position of clock & status key and will set display style. | 33 BR1200 User Manual P a g e...
Note: When deleting the attendance record, attendance picture or blacklist picture, you can select Delete All or Delete by Time Range. When Delete by Time Range is selected, you need to set the time range for data deletion. | 34 BR1200 User Manual P a g e...
System Data) > edit Backup Notes (This step is optional.) > Backup Start to start backup. Restarting the device is not needed after backup is completed. 9.3 Data Restoration To restore the data in the device to the device. | 35 BR1200 User Manual P a g e...
Page 41
In the initial interface, press choose content to be restored (Business Data / System Data) > Start Restore > select Yes to start restoring. After restoration completes, click [OK] to automatically restart the device. | 36 BR1200 User Manual P a g e...
10.1 Access Control Options Settings button > Access Control > Access Control When the device is on the initial interface, press Options to enter the Access Control Options setting interface. | 37 BR1200 User Manual P a g e...
Page 43
Anti-Passback direction, device status, duress function, alarm on 1:1 match, alarm on 1: N match, alarm on password and alarm delay. However, the content of the Access Data Deletion in [Data Mgt.] will not be affected. | 38 BR1200 User Manual P a g e...
“2”), the time rule (2) will be and enter time period setting as required, after setting, press located automatically, select a interface. [Confirm(OK)] to save and exit. time schedule (such as “Monday”). | 39 BR1200 User Manual P a g e...
Looping or not: The default value of Looping or not is [ON]. You can press button to switch between [ON] and [OFF]. For fixed holidays every year, for example, the New Year's Day is January 1, Looping or not can be | 41 BR1200 User Manual P a g e...
Edit or delete the holiday. Holidays setting interface. Remarks: The methods of editing or deleting a holiday are the same as those of editing or deleting a user and are not described here. | 42 BR1200 User Manual P a g e...
When the device is on the initial interface, press ID (if no ID is entered, all user records will be searched) > select Time Range, the corresponding attendance logs will be shown. | 43 BR1200 User Manual P a g e...
Touch the screen to start counting time, and press it again to stop counting, to see if the stopwatch counts time accurately. Press button to exit the test. | 44 BR1200 User Manual P a g e...
Dev service and system version. Remark: The display of Device Capacity, Device Info and Firmware Info on the system information interface of different products may vary; the actual product shall prevail. | 45 BR1200 User Manual P a g e...
To get the alarm sound, the speaker should be ON in setting Access Control > Access Control Options > Speaker Alarm. | 46 BR1200 User Manual P a g e...
Every year people around the globe suffer from great loss due to the insecurity of passwords. The biometric products actually provide adequate protection for your identity under a high security environment. | 47 BR1200 User Manual P a g e...
This mark number indicates that the environment friendly use period of the product under normal use is 15 years. Some parts may also have an environment friendly use period, please refer to its mark number. | 48 BR1200 User Manual P a g e...