Table of Contents
Advertisement
Add existing networks
The screen will display a list of existing networks.
Select a certain network from the list and tap
key. The selected network will be added to the bottom
of the preferred network list.
Add network code
Open the editor, enter the country code and network
code of the mobile network in order. Confirm again
to add the code to the preferred network list.
Attach GPRS
Your phone supports GPRS. This option specifies
GPRS attach: Always or Data only.
Register again
If you select this menu, the phone will start to search
for available networks and the list of available
networks will be displayed on the screen. Select a
Register
network and tap
attempt to register with the selected network.
Network account
This menu allows you to select a network account.
When using WAP or sending MMS, the phone will
use the selected mode to connect to GSM or GPRS
network.
32
Add
soft
soft key, the phone will
Note: the following contents in square brackets are
examples of the current parameters of China Mobile.
The specific contents are supplied by your network
operator. All the options in the following description
are operator and subscription dependent. Error
messages when connecting is mainly due to parameter
error. Please contact your operator for more
information when you are using the phone for the first
time. Some operators will send Internet connection
parameters to users via SMS. Certain pre configured
modes may be locked to prevent resetting and
renaming.
Network account
When you enter
display a list of connection accounts. Click
View
soft key option to
or
current selected account. The settings are as follows:
Account name
You can rename the selected account name.
Bearer
There are 2 methods to access WAP: traditional GSM
or GPRS. You can specify your settings here:
GPRS
only: Connect via GPRS only.
•
GSM
only: Connect via GSM only.
•
menu, the screen will
Edit
the information of the
Settings
Advertisement
Table of Contents
