Register Again; Preferred List; Access Settings - Philips 355 Manual

energy consumption, however it will increase the
connection delay.
In spite of these settings, you must still select the bearer
(GSM or GPRS) in the menus of each application to
be used (e.g., WAP, MMS, e-mail, etc.).

Register again

Provides you with a list of the networks
available in the area when the
Register again mode is selected. Select the network you
want to register with and press

Preferred list

Allows you to build a network list in
order of preference. Once defined, the
Preferred list
phone will try to register on a network,
according to your preferences.

Access settings

This menu allows you to create several
data profiles: when using WAP or when
Access settings
sending a multimedia message (MMS),
the selected profile will be used to connect to the
GSM or GPRS network.
All options described below are operator and/or
subscription dependent.With some operators, you may
38
Manual
,
to confirm.
receive a SMS which contains access parameters that
will be stored automatically. Please contact your
network operator for detailed information on this
subject.
Change name
Allows you to enter or change the name
of the selected profile. Press
Change name
the name of your choice and press
to confirm.
Some pre-configured profiles might be locked,
preventing re-programming and renaming.
Show
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
Show
etc.), either
GSM settings
Allows you to enter or change the GSM
settings and gives you access to the
GSM settings
following items:
Login and Password allow you to enter the login and
password needed. In both cases, enter the information
,
and press to confirm.
allows you to enter the phone number
Phone Number
needed to establish a connection. Select
,
numbers and press , then press
,
, enter
or GPRS.
GSM
Phone
+ -
or to select:
Settings
,