Table of Contents
Advertisement
Note: You must activate bluetooth feature to carry out
the above operations. Select Data Connection > Bluetooth
> Phone settings > Activate from the main menu.
When you have found a device of a certain device type
(e.g. data exchange device), if this device also has other
features (e.g. gateway device ), it will be listed in other
device types as well (e.g. gateway device and all other
devices). The following options are available when
you enter the bluetooth menu:
Voice device
This menu allows you to search and connect to your
bluetooth headset.
If you have successfully connected to a bluetooth
headset before, a list of bluetooth device names and
the connection history will be displayed when you
enter the menu.
Select an entry from the connection history and tap
OK, then your phone will display the following menu
item:
1. Connect
2. Trust
3. Rename
4. Delete
5. Device information
Data connection
Connect
Select the first option Connect, tap OK, or tap the check
box at the end of Connect. The phone will send a
connection request to the bluetooth headset. Enter
the password in the following password input screen
and connect to the bluetooth headset.
If your bluetooth headset does not support passive
connection, please turn on the bluetooth feature (do
not set Hide), place the phone close to the headset and
press the power key on the headset to switch it on.
The headset will send a search and connection request
when it is switch on. A password input box for
connection will appear on your phone. After entering
the correct password (normally 0000), you will see a
Connection succeeded
prompt and the headset will go
into connection mode.
When successfully connected, your phone will
automatically use the bluetooth headset for
communication when you make a call or answer a call.
You can use the function keys on the bluetooth
headset to adjust the volume, answer or end a call.
Please refer to the bluetooth headset user manual for
more information.
13
Advertisement
Table of Contents
