Table of Contents
Advertisement
This menu allows you to define the attach mode of
your mobile phone to the GPRS service:
Always on
Your phone will always register to the GPRS service.
This option allows faster GPRS connection. However
it will increase energy consumption.
For data calls
Your phone will automatically register to the GPRS
service only when required. This option reduces energy
consumption, however it will increase the connection
delay.
In spite of these settings, you must still select the bearer
(GSM or GPRS) in the menus of each application to be
used (e.g., WAP, MMS, e-mail, etc.).
Register again
Provides you with a list of the networks
available in the area when the
mode is selected. Select the network you
want to register with and press
Preferred list
Allows you to build a network list in
order of preference. Once defined, the
phone will try to register on a network,
according to your preferences.
40
Manual
,
to confirm.
Access settings
This menu allows you to create several
data profiles: when using WAP or when
sending a multimedia message (MMS),
the selected profile will be used to connect to the GSM
or GPRS network.
All options described below are operator and/or
subscription dependent.With some operators, you may
receive a SMS which contains access parameters that
will be stored automatically. Please contact your
network operator for detailed information on this
subject.
Change name
Allows you to enter or change the name
of the selected profile. Press
the name of your choice and press
confirm.
Some pre-configured profiles might be locked,
preventing re-programming and renaming.
Show
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
etc.), either
,
, enter
,
or GPRS.
GSM
Settings
to
Advertisement
Table of Contents
