Sloan SU-7025 Installation Instructions

BEFORE YOU BEGIN
WARNING: Risk of personal injury or product damage
• Vitreous China can break or chip if the bolts and nuts are over-
tightened, or if the product is handled carelessly.
• Observe all local plumbing and building codes.
• Check for any damage to the new urinal before installation.
• Make sure the wall is strong enough to support the new urinal prior
to installation. Reinforce or install a urinal carrier if necessary.
 Minimum Flowing Pressure: 10 PSI
WARNING: hazardous gases can escape through the waste pipe
if new urinal is not installed quickly. A temporary fix: place a rag in
the waste pipe hole.
RECOMMENDED TOOLS AND MATERIALS:-
INSTALLATION GUIDELINE
344, PHASE-II, UDYOG VIHAR, GURGAON 122015 Phone: (+91) 124-6013333
Toll Free: 1800.123.3080 |
INSTALLATION INSTRUCTIONS
SLOAN INDIA PRIVATE LIMITED
customercare@sloan.in |
.
Handle with care.
Silicone
sloan.in Copyright © 2023 Sloan. All rights reserved.
SU-7025
Rear Inlet Flat
Back Urinal
• FOR BEST PERFORMANCE OF YOUR
SLOAN® URINAL, USE SLOAN®
Concealed Sensor Urinal Flush
Valve
Code:68160079 Rev-01 11-23