Controls / Display; Language; Language Entry - Miele PDR 908 HP Operating And Installation Instructions

Supervisor level

Controls / Display

Language

The display can be set to appear in one
of several different languages. To se-
lect the language you want, go to the
Languages sub-menu.
You can change the language as follows:
- Permanently using the supervisor
level (= "Supervisor language").
- For the duration of the current pro-
gramme only using the  sensor
control. The supervisor language is
displayed again at the end of the pro-
gramme.
92

Language entry

The display can be set to one of sev-
eral different user languages. This set-
ting allows you to determine how lan-
guages can be selected.
The language can be changed as fol-
lows:
International
Six languages are available. The
 sensor is not active. Note the set-
ting
Set languages
Language setting
The  sensor can be used to select
a language. All languages are available
(factory default).
You can change the order of the first
four languages. These slots are alloc-
ated to the most commonly used lan-
guages.
Standard language
The user language cannot be changed.
The user language is the same as the
supervisor language. The  sensor
is not active.
.