Miele PDR 908 HP Operating And Installation Instructions page 72

Problem solving guide
Message

Rinse the fluff filter
and the plinth filter.
Check the airways.

Check water drain-
age

Fault F. If restart
fails, call Service
72
Cause and remedy
The plinth filter looks clean after thorough cleaning.
However, the programme is cancelled and the fault
message appears again. The reason for this is that
there is still underlying residue that cannot be re-
moved.
 To delete the message: touch the
trol.
 Replace the plinth filter with a new one.
 You can reactivate the removed, "old" plinth filter in
the washing machine. Follow the instructions de-
scribed in "Problem solving guide – Reactivating
the plinth filter".
The condensate drain is faulty.
 Check that the drain hose is in good working order
and is not bent.
 To delete the message: open and close the door
while the tumble dryer is switched on.
There is no obvious cause for the cancellation of the
programme.
 Note the prompt in the display.
 Touch the sensor control.
OK
 Start a drying programme.
If the programme is cancelled again with the same
fault message, then there is a fault. Contact the Miele
Customer Service Department.
sensor con-
OK