Miele PDR 908 HP Operating And Installation Instructions page 12

Heat-pump dryer
Table of Contents

Advertisement

Warning and Safety instructions
Do not install a lockable door, a sliding door or a door which is
hinged in the opposite direction to the dryer door.
This tumble dryer is supplied with a special lamp to cope with par-
ticular conditions (e.g. relating to temperature, moisture, chemical
resistance, abrasion resistance and vibration). This special lamp must
only be used for the purpose for which it is intended. It is not suitable
for room lighting. Replacement lamps may only be fitted by a Miele
authorised person or by Miele Service.
Information on the heat pump and refrigerant
- This tumble dryer uses refrigerant gas which is not flammable and
not explosive.
- The humming noises caused by the heat pump during the drying
process are normal. They do not impair the efficient functioning of
the tumble dryer.
 Damage to the tumble dryer by switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer, wait for at least one hour before
switching it on.
- This tumble dryer contains fluorinated greenhouse gases (F-Gas).
They are hermetically sealed.
Designation of refrigerant: R134a
Amount of refrigerant: 0.61 kg
Global warming potential of refrigerant: 1430 kg CO
Global warming potential of appliance: 872 kg CO
12
e
2
e
2

Advertisement

Table of Contents
loading

Table of Contents