Technics SA-GX505 Operating Instructions Manual page 10

(continued)
P.EQ/TONE
(eld « TONE MODE *P.EQ MODE
"MANUAL
Np c=
OLN IOLIIIOo
DO (pacar suaroon]
Note:
Channel display
Band indicators (FM, LW, MW)
Indicates the selected band.
Memory indicator (MEMORY)
Memory scan indicator (M. SCAN)
This indicator illuminates when the memory scan button is
pressed.
(INPUT SELECTOR/FREQUENCY)
Displays the selected source or broadcast frequency.
Tape indicator (TAPE)
This indicator illuminates when the tape-monitor switch is
pressed.
VCR display (VCR)
Displays the selected VCR.
Loudness indicator (LOUDNESS)
This indicator illuminates when the loudness switch is
pressed.
Muting indicator (MUTING)
This indicator illuminates when the muting button (on the
remote-control transmitter) is pressed.
Center mode indicators
These indicators show the center mode selected by the
center mode select button.
Rear/center level indicator
Displays the level adjusted by the center speaker level
adjustment buttons or rear speaker level adjustment but-
tons.
Test signal indicator (i TEST)
This indicator illuminates when the test signal button is press-
ed in the Dolby Pro-Logic Surround mode and the Dolby 3
stereo mode.