Using The Parametric Eq - Technics SA-GX505 Operating Instructions Manual

Using the Parametric EQ
In order to make the parametric EQ system easy to use, this unit
comes with a factory programmed demonstration mode (adjust-
ment example).
Refer to the demonstration as you carry out the operations on the
following page, if necessary.
Start the sound source.
(Refer to page 14.)
Press and hold the display mode select but-
ton for 3 seconds or more.
The demonstration mode will start.
Sound will be changed according to the change of display.
The demonstration mode is automatically repeated.
Press the display mode select button
momentarily.
The demonstration mode is cancelled and the display swit-
ches to the original display mode.
The preferred display mode can now be selected.