Table of Contents
Advertisement
BSM (
To exit the settings, press the back button
Blind Spot Monitor OFF
When turn the Blind Spot Monitor OFF
a warning box appears and then to exit
O
press the
Sorbo Luigi
Blind Spot Monitor
â
1) Press the
key to bring up the settings menu.
2) Choose the memory location between 1, 2 or 3
à
ß
with the
or
keys to configure the display
you want to personalize, then press OK.
â
Press the
key to choose BSM and
then the OK botton for ON/OFF
The Blind Spot Monitor is a
system that uses rear side
radar sensors installed on the
inner side of the rear bumper
on the left and right side to
assist the driver in confirming
safety when changing lanes.
button.
)
O
until you reach the settings menu.
Meter control switches
Turning the Blind Spot Monitor on/off.
Outside rear view mirror indicators
When a vehicle is detected in a blind
spot of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illumi-
nate. If the turn signal lever is operated
toward the detected side, the outside
rear view mirror indicator flashes.
Driving assist information indicator
Illuminates when the Blind Spot Monitor
is turned off. At this time, "Blind Spot
Monitor OFF" will be displayed on the
multi-information display.
4
Settings
2
Hold
OK
to Change Settings
Adjust Meter Brightness
LDA
BSM
PCS
PDA
:System ON/OFF
OK
Hold
OK
to Change Settings
Ver.001 del 04/12/23
Advertisement
Table of Contents
