Table of Contents
Advertisement
RSA (Road Sign Assist)
The RSA system detects specific road signs using the front camera and/or navigation system
(when speed limit information is available) and warns the driver via displays and buzzers.
In the following situations, the RSA system will output a warning to notify the driver.
●
If the vehicle speed exceeds the speed warning threshold of the speed limit sign displayed on the
display, the sign display will be emphasized and a buzzer will sound.
●
When the RSA system detects a no-entry sign and determines that the vehicle has entered the
no-entry area based on the map information of the navigation system, the no-entry sign displayed
on the multi-information display will flash and a buzzer will sound. (vehicles with a navigation system)
The following types of road signs can be displayed.
However, non-standard or recently introduced traffic signs may not be displayed.
8 0
80
Speed limit
No overtaking
Motorway
Expressway
To exit the settings, press the back button
To exit the settings, press the back button
Sorbo Luigi
â
1) Press the
key to bring up the settings menu.
2) Choose the memory location between 1, 2 or 3
à
ß
with the
or
keys to configure the display
you want to personalize, then press OK.
â
Press the
key to choose RSA and
then the OK botton for ON/OFF
- -
No speed limt info.
Residential area
Men at work
No-entry
Zebra crossing
STOP
Stop
Rain
Wet
Supplemental mark exists
Speed limit with supplemental mark
O
O
until you reach the settings menu.
until you reach the settings menu.
11
Settings
2
Hold
OK
to Change Settings
P
RCTA
PKSB
SEA
RSA
OK
:System ON/OFF
Hold
OK
to Change Settings
Residential area
Urban area
Ice
!
Ver.001 del 04/12/23
Advertisement
Table of Contents
