Table of Contents
Advertisement
SEA (Safe Exit Assist)
The safe exit assist is a system that uses rear side radar sensors installed on the inner side
of the rear bumper to help occupants judge if an approaching vehicle or bicycle may collide
with a door when opening it or cancel opening of the door, to reduce the possibility of a collision.
Multi-information display
Turning the safe exit assist on/off.
When the system determines that the possibility of
a collision with a door is high, the target door is
displayed on the multi-information display. Also,
if the door is opened when the outside rear view
mirror indicator is illuminated, a buzzer will sound
as a warning.
Outside rear view mirror indicators When a vehicle
or bicycle which may collide with a door (other than
the back door) when opened is detected, the outside
rear view mirror indicator on the detected side will
illuminate. When a door on the detected side is opened, the outside rear view mirror indicator will flash.
Driving assist information indicator Illuminates when the safe exit assist is turned off. At this time,
"Safe Exit Assist OFF" will be displayed on the multi-information display.
Vehicle or bicycle which has a high possibility of colliding with a door (other than the back door)
when opened
The system is automatically activated every time the power switch is turned ON even
if it was previously deactivated
To exit the settings, press the back button
Sorbo Luigi
â
1) Press the
key to bring up the settings menu.
2) Choose the memory location between 1, 2 or 3
à
ß
with the
or
keys to configure the display
you want to personalize, then press OK.
â
Press the
key to choose SEA and
then the OK botton for ON/OFF
45 m (145 ft.)
Approximately 45 m (145 ft.)
Rearward from the front door
O
until you reach the settings menu.
10
Settings
2
Hold
OK
to Change Settings
P
RCTA
PKSB
SEA
RSA
OK
:System ON/OFF
Hold
OK
to Change Settings
Ver.001 del 04/12/23
Advertisement
Table of Contents
