Techly 101935 User Manual

EN
INTRODUCTION
4x1 DP&USB KVM Switch allows you to share a display, USB keyboard & mouse with audio and
microphone between four USB & DP computers. It comes with two extra USB 2.0 ports with over-
current detection and protection for additional device connections. It supports resolutions of up to
3840*2160@60HZ with video link rate up to 21.6Gbps, Dolby True HD and DTS HD Master Audio
formats. Also, it features metal housing for better RF shielding and allows user to switch between
devices via front push button or hotkey. It is fully compatible with a wide variety of Windows and Mac
OS operating systems.
FEATURES
• Saves space and equipment cost
• Share an HDTV or display, USB keyboard & mouse with audio and microphone among 4 USB/DP
computer and devices*
• Provides additional USB 2.0 ports with over-current detection and protection
• Switch between devices via front push button or hotkey
• Supports Dolby True HD and DTS HD Master Audio formats
• Metal housing for increased RF shielding
Note: 1 of the 4 connected devices has to be a computer with a USB connection to enable the
switching mechanism
REQUIREMENTS
• Windows, Mac, Linux computers
• Game consoles, BIu-Ray DVD players and other Consumer Electronics devices
PANEL DESCRIPTIONS
1 2
① ②
1) Port LED: Indicate PC1 source is selected
2) Port LED: Indicate PC2 source is selected
3) Port LED: Indicate PC3 source is selected
4) Port LED: Indicate PC4 source is selected
5) Power LED: The power LED will illuminate when the unit is powered
6) PC select button: Switch between the PC1&PC2&PC3&PC4 sources Console
DisplayPort
DisplayPort
Console
DisplayPort USB USB USB
DC 5V
① ② ③ ④ ⑤ ⑥ ⑦
DC 5V USB USB
① ② ③ ④ ⑤ ⑥ ⑦
1) Power Jack: Connect to the included power adapter
2) Audio out: Connect to earphone
3) MIC: Connect to microphone
4) USB Mouse Port: Connect to USB mouse devices
5) USB Keyboard Port: Connect to USB keyboard devices bandwidth: up to 21.6 Gb/s
6) USB Ports: Connect to other USB devices
7) DisplayPort Output: Connect to DisplayPort Display
8) PC4 Connectors: Connect to source device's
9) PC3 Connectors: Connect to source device's
10) PC2 Connectors: Connect to source device's
11) PC1 Connectors: Connect to source device's
CONNECTION DIAGRAM
Display
Earphone Microphone USB Enclosure
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
• Main unit x1
• User Manual x1
• 5V/2A Power Supply x 1
WWW.TECHLY.COM
3 4 Power Select
③ ④ ⑤ ⑥
PC4 PC3 PC2 PC1
DisplayPort DisplayPort DisplayPort
PC4 PC3 PC2
USB USB USB
DisplayPort DisplayPort DisplayPort DisplayPort
⑧ ⑨ ⑩
USB USB USB USB
⑧ ⑨ ⑩
Desktop PC Desktop PC Desktop PC Desktop PC
SPECIFICATIONS
• Supports display port resolution up to 3840X2160@60HZ, Video bandwidth up to 21.6Gb/s
• Support USB 2.0 High Speed up to 480Mbps
• Housing: Metal
• Color: Black
• Interfaces/Ports:
- Input: 4x DisplayPort, Female
- Input: 4x 4-pin, Type B, USB 2.0 Female
- Output: 1x DisplayPort, Female (Dual head)
- 1x 4-pin, USB 2.0, Type A, Female (for keyboard)
- 1x 4-pin, USB 2.0, Type A, Female (for mouse)
- 2x 4-pin, USB 2.0, Type A, Female
- 1x Microphone jack (to microphone)
- 1x stereo audio jack (to earphone)
• Power adapter:
- Input: 100 - 240V, 50/60Hz
- Output: 5V DC, 2.0A
HOTKEY
Follow the hotkey command listed below for selected operating functions:
Command
Scroll Lock + Scroll Lock
Scroll Lock + Scroll Lock+[Enter]
Scroll Lock + Scroll Lock+ [N]
Scroll Lock + Scroll Lock+ P + W + [0/1]
Scroll Lock + Scroll Lock + P + L + U + G + [0/1]
Scroll Lock + Scroll Lock + B + [0/1]
Scroll Lock + Scroll Lock + S
Scroll Lock + Scroll Lock + U + [Enter]
Note:
PC1
(*): The buzzer sound:
Hotkey Active: 1 beep
Error: 2 Beeps
(**): Space bar of keyboard to stop auto-scan
Any key of keyboard to stop auto-scan and jump to current scan port (not include space bar)
SAFETY PRECAUTION AND MAINTENANCE
INTENDED USE
We do not permit using the device in other ways like described in this user's manual. Use
the product only in dry interior rooms. Not attending to these regulations and safety
instruction might cause fatal accidents, injuries, and damages to persons and property. The
manufacturer / supplier assume no liability for damages caused by failure to comply with the
intended use.
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
other equipment if a problem should occur. Do not expose the product to water or moisture. Your
product is not a toy and is not meant for children, because it contains small parts which can be
swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot be injured, or
objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on them while playing.
Furthermore, there is a risk of swallowing and inhalation of incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which might come into contact with
water. Do not install the product close to openings of air conditioners, or at places with an excessive
amount of dust or smoke.
• Do not install the product at places subject to vibration, or oscillation
• Do not modify and alter the product and any accessories! Do not use any damaged parts.
• Keep enough space around all devices for a good ventilation and free motion and to avoid damages.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
In compliance with EU Directive WEEE this product is marked with this symbol. It means
that used electrical and electronic products should not be mixed with general household
waste. There is a separate collections system for these products in compliance with WEEE
directive, otherwise contaminative and hazardous substances can pollute the
environment.
With the CE sign, Techly
standards and directives.
4X1 DP1.2&USB2.0 KVM SWITCH
USER'S MANUAL
1 2 3 4 Power
1 2 3 4 Power
Function
① ② ③ ④ ⑤
Start Hotkey mode
① ② ③ ④
Port switch to next active port
Port switch to desired port N (1 ~ 4)
Port switch with host USB power detected.
1 - Enable
0 - Disable (Default)
Port switch when new host plug in
1 - Enable
0 - Disable (Default)
Buzzer sound On/Off control
1 - Enable (Default)(*)
0 - Disable
Auto-scan On(**)
Reboot and enter IAP mode to update
firmware
To reduce risk of electric shock, this product
should ONLY be opened by an authorized
technician when service is required.
Disconnect the product from mains and
® ensures that the product is conformed to the basic European
Select
Select
⑥
⑤ ⑥