ZyXEL Communications PLA-450 User Manual page 83

Table 22 Network > LAN > IP
LABEL
User Defined LAN
IP
IP Address
IP Subnet Mask
Gateway IP
Address
Apply
Reset
PLA450 User's Guide
DESCRIPTION
Select this option to use a specific (fixed) IP address.
Enter the PLA450's IP address in dotted decimal notation. 192.168.1.2 is the
factory default.
Enter the IP subnet mask in this field if you have a specific IP address for the
PLA450 to use.
The subnet mask specifies the network number portion of an IP address. Your
PLA450 automatically calculates the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the PLA450.
Enter a gateway IP address in this field if you have a specific IP address for the
PLA450 to use.
Click Apply to save your changes back to the PLA450.
Click Reset to begin configuring this screen afresh.
Chapter 7 LAN
83