Wireless Tutorial; Chapter 5 Wireless Tutorial; Example Parameters; Configuring The Pla450 - ZyXEL Communications PLA-450 User Manual

C
H A P T E R
This chapter gives you examples of how to set up the PLA450 and wireless client for wireless
communication using the following parameters. The wireless clients can access the Internet
through the PLA450 wirelessly. See
LAN configuration.

5.1 Example Parameters

SSID
Channel
Security
802.11 mode
In this chapter, the PLA450 is also referred to as an access point (AP). A computer with a
wireless network card or USB/PCI adapter is referred to here as a "wireless client".
This chapter uses the M-302 utility screens as an example for the wireless client. The screens
may vary for different models.

5.2 Configuring the PLA450

Follow the steps below to configure the wireless settings on your PLA450.
1 Open the Network > Wireless LAN > General screen in the web configurator.
PLA450 User's Guide

Wireless Tutorial

Chapter 6 on page 57
SSID_Example3
6
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
IEEE 802.11b/g
5
for more on the PLA450's wireless
47