Internet Access - ZyXEL Communications PLA-450 User Manual

6 If the problem continues, contact the network administrator or vendor, or try one of the
advanced suggestions.
Advanced Suggestions
• If your computer is connected through the Internet or is connected wirelessly, use a
computer that is connected to the LAN port.
I can see the Login screen, but I cannot log in to the PLA450.
1 Make sure you have entered the password correctly. The default password is 1234. This
field is case-sensitive, so make sure [Caps Lock] is not on.
2 You cannot log in to the web configurator while someone is using Telnet to access the
PLA450. Log out of the PLA450 in the other session, or ask the person who is logged in
to log out.
3 Disconnect and re-connect the power adaptor or cord to the PLA450.
4 If this does not work, you have to reset the device to its factory defaults. See
14.4 on page
I cannot Telnet to the PLA450.
See the troubleshooting suggestions for
configurator.
I cannot use FTP to upload / download the configuration file. / I cannot use
FTP to upload new firmware.
See the troubleshooting suggestions for
configurator.

14.3 Internet Access

I cannot access the Internet.
1 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide.
PLA450 User's Guide
118.
Ignore the suggestions about your browser.
Ignore the suggestions about your browser.
I cannot see or access the Login screen in the web
I cannot see or access the Login screen in the web
Chapter 14 Troubleshooting
Section
117