ZyXEL Communications PLA-450 User Manual page 104

Chapter 10 Logs
Table 31 Maintenance > Logs > Log Settings
LABEL
User Name
Password
Log Schedule
Day for Sending Log Use the drop down list box to select which day of the week to send the logs.
Time for Sending
Log
Clear log after
sending mail
Syslog Logging
Active
Syslog Server IP
Address
Log Facility
Active Log and Alert
Log
Send Immediate
Alert
Apply
Reset
104
DESCRIPTION
Enter the user name (up to 31 characters) (usually the user name of a mail
account).
Enter the password associated with the user name above.
This drop-down menu is used to configure the frequency of log messages being
sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If you select Weekly or Daily, specify a time of day when the E-mail should be
sent. If you select Weekly, then also specify which day of the week the E-mail
should be sent. If you select When Log is Full, an alert is sent when the log fills
up. If you select None, no log messages are sent.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm)
to send the logs.
Select the checkbox to delete all the logs after the PLA450 sends an E-mail of
the logs.
The PLA450 sends a log to an external syslog server.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Select a location from the drop down list box. The log facility allows you to log
the messages to different files in the syslog server. Refer to the syslog server
manual for more information.
Select the categories of logs that you want to record.
Select log categories for which you want the PLA450 to send E-mail alerts
immediately.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
PLA450 User's Guide