Back To Factory Defaults; Figure 60 Configuration Restore Successful; Figure 61 Temporarily Disconnected; Figure 62 Configuration Restore Error - ZyXEL Communications PLA-450 User Manual

Chapter 11 Tools
Do not turn off the PLA450 while configuration file upload is in progress
After you see a "configuration upload successful" screen, you must then wait one minute
before logging into the PLA450 again.

Figure 60 Configuration Restore Successful

The PLA450 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 61 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default PLA450 IP address (192.168.1.2). See
your Quick Start Guide for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 62 Configuration Restore Error

11.2.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the PLA450 to its factory defaults.
108
PLA450 User's Guide