Wireless Lan Advanced Screen; Figure 37 Network > Wireless Lan > Mac Filter; Table 15 Network > Wireless Lan > Mac Filter - ZyXEL Communications PLA-450 User Manual

Chapter 6 Wireless LAN
Figure 37 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 15 Network > Wireless LAN > MAC Filter
LABEL
Active
Filter Action
Set
MAC
Address
Apply
Reset

6.8 Wireless LAN Advanced Screen

Click Network > Wireless LAN > Advanced. The screen appears as shown.
72
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the PLA450, MAC addresses not listed will be allowed
to access the PLA450
Select Allow to permit access to the PLA450, MAC addresses not listed will be denied
access to the PLA450.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied access to
the PLA450 in these address fields. Enter the MAC addresses in a valid MAC address
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click Apply to save your changes back to the PLA450.
Click Reset to reload the previous configuration for this screen.
PLA450 User's Guide