Chapter 9 System
Table 28 Maintenance > System > General
LABEL
Password Setup
Old Password
New Password
Retype to Confirm
Apply
Reset
9.2 Time Setting Screen
To change your PLA450's time and date, click Maintenance > System > Time Setting. The
screen appears as shown. Use this screen to configure the PLA450's time based on your local
time zone.
Figure 52 Maintenance > System > Time Setting
98
DESCRIPTION
Change your PLA450's password (recommended) using the fields as shown.
Type the default password or the existing password you use to access the
system in this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the PLA450.
Click Reset to begin configuring this screen afresh.
PLA450 User's Guide