Dc Tig/Gtaw Pulse - ESAB Rebel EMP 205ic AC/DC Instruction Manual

6 USER INTERFACE
ICON
6.18

DC TIG/GTAW Pulse

DC TIG/GTAW Pulse welding is used primarily on thin metals but can also be used on thicker
material based on the application. Pulsing allows the user to control the amount of heat input
to the work piece. Pulse gives user far more control over the welding process without
compromising the strength and integrity of the weld and helps in having a smooth and clean
weld.
Basic Mode:
In basic DC TIG/GTAW Pulse mode, the default settings are: Background Current 50%,
Pulse Peak Time 50% and Pulses per Second: 2. User will not be able to adjust these Pulse
parameters, in order to adjust these parameters user has to go to advanced mode. Below
picture illustration shows the navigation/setup of DC TIG/GTAW Pulse in basic mode
(A-B-C-D).
0463 652 101
MEANING
AC TIG/GTAW
HF On/Off
PPS
Peak Time
Offset
Retrieve
- 41 -
ICON MEANING
Pulse
Pulse On/Off
Background current
Balance
Frequency
Erase
© ESAB AB 2024