Settings; User Manual Information; Icon Reference Guide - ESAB Rebel EMP 205ic AC/DC Instruction Manual

6 USER INTERFACE
6.15

Settings

6.16

User manual information

6.17

Icon reference guide

NOTE!
SCT – Short Circuit Termination is a method of automatic burn back at the end of
the weld to electrically cut the wire by pulsing high current in a controlled process.
The result is a nice clean wire end with no balling or sticking to the weld pool or tip.
This allows exceptional restarting of subsequent welds. This feature is primarily for
Mild and Stainless steel short-arc welding. For spray and flux core welding,
traditional burn back is recommended. When burn back time is set to zero, SCT
automatically is enabled. A non-zero burn back setting will disable SCT.
ICON
0463 652 101
MEANING
Home
Burn back time
- 38 -
1. Reset mode selection
2. Unit of measure selection
3. Basic or advanced selection
4. Language selection
5. Information
6. Home screen selection
7. Dialogue box
1. Maintenance information
2. Wear part information
3. Operation information
4. Home screen selection
5. Dialogue box
ICON
Spot time on/off
selection
SCT Selection on Short Circuit
display Termination
MEANING
© ESAB AB 2024