Bluetooth Profiles; Menu; Maintenance; Changing The Battery - GARANT HCT 412781 User Manual

GARANT HCT digital caliper
de
6.3.3.

Bluetooth profiles

Use without an app (HID)
en
Windows, macOS, Linux
Android, iOS
bg
6.4.

MENU

C
da
 (1) Display set zero point:
Press MENU, press SET.
 (2) Unit of measurement:
fi
1. Press MENU 2×.
» The active setting (MM or INCH) is displayed.
2. Press SET to change the unit of measurement.
fr
» Press DATA to acknowledge.
 (3) Set the zero point:
it
3. Press MENU 3×, press SET.
» Press SET to set value to between 0 and 9; press MENU to skip to the next place.
hr
» Press DATA to acknowledge.
 (4) Bluetooth mode / RESET / MAC address:
4. Press MENU 4×, press SET to activate Bluetooth in HID mode (PC connection).
lt
5. Press SET to deactivate Bluetooth.
6. Press SET to break the Bluetooth connection (RESET).
nl
7. Press SET to display the MAC address of the connected Bluetooth device
» Press DATA to acknowledge.
no
 (5) Setting the current value as the zero point:
Press SET and MENU simultaneously for longer than six seconds.
7.

Maintenance

pl
Interval
According to individual requirements
pt
7.1.

CHANGING THE BATTERY

1. Pry open the battery compartment carefully with a slot-head screwdriver.
ro
2. Replace CR2032 battery (positive terminal pointing upwards).
3. Insert battery compartment and press into casing.
8.

Troubleshooting

ru
Fault
Cannot establish a connection to the
sv
caliper.
Error message on the display: Err.bt2
sk
sl
9.

Cleaning

Remove dirt using a soft, clean and dry cloth. After contact with liquids, dry mechanical parts well. Do not use chemical, al-
es
cohol-based, abrasive or solvent-based cleaners.

10. Storage

cs Store in the original box at temperatures between -10°C and +60°C. Do not store close to corrosive or aggressive chemical
substances, solvents, heat, moisture or dirt.

11. Technical data

hu
Frequency band
14
Use with an app (APP)
-
Android, iOS
Maintenance work
Recalibration according to A1 Cal
Possible causes
When using the caliper for the first time
it may take two or three attempts be-
fore the connection is established.
Configuration of the Bluetooth module
has malfunctioned.
2.4 GHz
To be performed by
Hoffmann Group Customer Service
Action
C
See the diagram no. 5 for RE-
SET.
1. Briefly press any key.
2. Repeat the procedure or perform
RESET.