Table of Contents
Advertisement
Safety Considerations (continued)
The resulting damage can range lrom
complete destruction to latent degrada-
tion.
Small geometry semiconductor
devices are especially susceptible to
damage by static discharge.
The LANIC card is shipped in a
transparent static shielding bag.
The
card should
be
kept in this bag at all
times until it is installed in the system.
Save this bag for storing or transporting
the card. When installing the card in
the system, do not touch any com-
ponents. Hold the card by its edges.
WARNING
SAFETY
EARTH
GROUND - The
computer in which this product is instal-
led is a safety class I product and Is
provided with a protective earthing ter-
minal. An uninterruptible safety ground
must be provided from the main source
to the product input wiring terminals,
power cord, or supplied power cord set.
Whenever
it
is likely that the protection
has been impaired, or. before the power
cord is removed from the wall receptacle,
the interface cable connector must be
removed from the computer system and
insulated
from
exposed
conductive
surfaces.
WARNING
At infrequent intervals, exposed metal
surfaces of the interface cables may be
subject to transient hazardous voltages
due to strong electrical disturbances
6
(such as lightning or disturbances in the
electrical utilities power grid) In the area
surrounding the network to which this
product is connected.
These surfaces
should
be
handled
with
caution,
especially when the interface cables are
not connected to a properly grounded
computer system.
SERVICING .
WARNING
Any servicing, adjustment, maintenance,
or repair of assemblies or subassemblies
of the computer system must be per-
formed only by qualified personnel.
WARNING
This product is not designed for attach-
ment to a network serving an area which
contains multiple unconnected power sys-
tem safety grounds.
Before installing
this product, verify that all of the power
system safety grounds are securely inter-
connected in the area served by the local
network.
Special caution should be
taken for cable systems run between
buildings
or
exposed
to
weather
environments.
WARNING
Do not connect this .product to an un-
grounded "thick" network coaxial cable
as defined by this manual.
Advertisement
Table of Contents
