To Keep Cooked Rice Warm And Tasty - Cuckoo CRP-PK06 Series Operating Instructions Manual

TO KEEP COOKED RICE WARM AND TASTY

How to adjust the Warm Temperature
If the "warm" temperature setting is incorrect, there is a chance the rice can become discolored. If this
happens, simply adjust the temperature. For more detailed information, please consult the customer service.
Recommended adjustments
1. In case of sour smell or soft-boiled rice: The warming temperature might be too low. Raise the
temperature by 1-2℃.
2. In case of yellowish or dry rice: The warming temperature might be too high. Lower the temperature
by 1-2℃..
How to adjust the Customized Warm function
This function is used in case that water runs when you open the inner lid while keeping warm or the
cooked rice is swelled up.
1. If water flows out too much when the lid is opened,
2. If the rice on the edge is overcooked,
After cooking
▶If you want to have warmer rice, press the Keep Warm/Reheat button to start the mode. You can have warm and nice rice after 9 minutes
of reheating.
" " on the display indicates
that the warming time is 3 hours.
To prevent drying and discoloration, avoid excessive use of reheating. No more than once or twice a day of reheating is desirable.
▶
If rice is cooked seperately and you want to keep the rice warm with the appliance, simply place the rice in the Inner Pot and press
▶
the Keep Warm/Reheat button. "
cause unpleasant smell or discoloration.)
❶
To enter the "Warm Temp" setting mode in Standby mode, press the Auto
Clean button for 3 seconds. In the "Warm Temp" setting mode, the currently
set temperature is displayed.
❷
Press the Menu/Selection button so that the Display shows
❸
Select your desired temperature by pressing the Pressure Cook/Turbo or Keep
Warm/Reheat button. (It returns to Standby mode if you press cancel or no
button for 7 seconds in the "Warm Temp" menu.) (If you press the Auto Clean
button, you can enter the Customized Warm setting mode without saving the
changed setting)
❶
Enter the warm temperature setting mode in Standby mode by press the Auto Clean
button for 3 seconds, and then press the Auto Clean button again to "Customized Warm".
setting mode.
❷
Press the Menu/Selection button so that the Display changes as the following order
❸
Select your desired Customized Warm temperature by pressing the Pressure
Cook/Turbo or Keep Warm/Reheat button to save and return to the Standby mode. (If
you press the cancel button or no button within 7 seconds, the function will be
cancelled and it returns to Standby mode). (If you press the Auto Clean button, you can
enter the Customized Cooking setting mode without saving the changed value.)
set the customized warm option 1 to 2 levels higher.
set the customized warm option 1 to 2 levels higher.
The 'WARM' starts to blink and the
circle on the left revolves, showing
the remaining minutes.
" will appear on the screen. (Warming hot rice with the appliance when it is not heated can
※ The factory setting may differ from the manual.
When reheating is done, warming starts and
the remaining time is displayed.
19